• SHOP BY
    • Product

      Manufacturer

      Type

      Shaft diameter

      Size

      Power

      Speed

      Voltage

ONLINE SUPPORT

0906 955 057

SHOP

CARDAN SHAFT H TYPE SJ-HE-35X70 (7H) NO KEYWAY

DESCRIPTION: Cardan Shaft H type SJ-HE-35x70 (7H) no keyway our precision joints consist of a joint centre piece and two hubs that are interlinked by straps. Bearing of the joint heads is made by plain bearings with precision joints type H. The plain bearings type H limit the maximum permissible speed to 4,000 rpm. The maximum diffraction angle of our cardan shafts per joint is 45°

SPECIFICATIONS

Universal joint couplings type SJ-HE-35x70 (7H)

Universal joint couplings type SJ-HE-35x70 (7H) (Cardan couplings) suitable for every application in the range of general engineering up to a maximum speed of 4000 rpm. Cardan couplings type H precison single joint & Type HD precison double joint. Maximum articulation angle 45°. High dynamic load - small bearing clearance.

Precision Cardan joints coupling Type SJ-HE-35x70 (7H) in various versions acc. to DIN 808
Precision joints consist of a joint centre piece and two hubs that are interlinked by straps.
Bearing of the joint heads is made by plain or needle bearing selected based on the kind of application.

This bearing allows the precision joints (single joints) to compensate for significantly larger angular displacements compared to other coupling types. Double joints that have two bearings are able to offset radial displacement in addition.

Precision joints / cardan shafts in an extendable version are able to offset axial displacement in addition to angular and radial displacement.
Precision joint H: precision single cardan shaft / joint with plain bearings for speeds up to 4,000 rpm.
Available with finish bore H7, with feather keyway, square bore or hexagon bore, if requested
Max. bore diameter 50 mm

Catalogue Universal joint couplings type SJ-HE-35x70 (7H)

Download catalogue Cardan H  tài liệu khớp nối cardan H&HD KTR

Data sheet Cardan couplings type H 

Khớp nối trục cardan SJ-HE không then

KHỚP NỐI CARDAN sj-he KHÔNG THEN

lỗ trục d của khớp nối cardan SJ-HE không then  Kích thước lỗ trục khác nhau của cardan

 

Size (no keyway) d D L2 L1 C a b V SKT kg
SJ-HE-10x22 (03H) 10 22 48 24 12 3 11.4 10 10 0.10
SJ-HE-12x25 (04H) 12 25 56 28 13 4 13.8 12 12 0.16
SJ-HE-14x28 (05H) 14 28 60 30 14 5 16.3 14 14 0.20
SJ-HE-16x32 (1H) 16 32 68 34 16 5 18.3 16 16 0.30
SJ-HE-18x36 (2H) 18 36 74 37 17 6 20.8 18 18 0.45
SJ-HE-20x42 (3H) 20 42 82 41 18 6 22.8 20 20 0.60
SJ-HE-22x45 (4H) 22 45 95 47.5 22 6 24.8 22 22 0.95
SJ-HE-25x50 (5H) 25 50 108 54 26 8 28.3 25 25 1.20
SJ-HE-30x58 (6H) 30 58 122 61 29 8 33.3 30 30 1.85
SJ-HE-35x70 (7H) 35 70 140 70 33 10 38.3 ** ** 3.15
SJ-HE-40x80 (8H) 40 80 160 80 38 10 43.3 ** ** 4.60
SJ-HE-50x95 (9H) 50 95 190 95 46 14 53.8 ** ** 7.60
 

 

COMMENTS