EXTENSION JOINT COUPLING ET-GWN-35X70 (7GA)

Universal joint couplings type GA (Cardan couplings)

Universal joint couplings type ET-GWN-35x70 (7GA) (Cardan couplings) precision double joint - extendable, maximum articulation angle 90° for each joint. Bridging of bigger shaft distances. Cardan couplings type GA (plain bearing) nmax. = 1000 rpm

Bearing of the joint heads is made by plain bearing with precision joint type GA.The plain bearings of precision joint type GA limit the maximum permissible speed to 1,000 rpm, t The maximum diffraction angle per joint is 90°.

Cardan shaft / precision joint acc. to DIN 808
Cardan shaft GA: Extendable precision double joint with plain bearing
Max. speed Cardan shaft GA = 1,000 rpm
Max. diffraction angle = 90° per joint
Available with finish bore H7, with feather keyway, square bore or hexagon bore, if requested
Max. bore diameter 50 mm
Cardan shafts / precision joints ET-GWN-35x70 (7GA) in an extendable version are able to offset axial displacement in addition to angular and radial displacement.
Precision joints in various versions acc. to DIN 808
Precision joints consist of a joint centre piece and two hubs that are interlinked by straps.
Bearing of the joint heads is made by plain or needle bearing selected based on the kind of application.

This bearing allows the precision joints (single joints) to compensate for significantly larger angular displacements compared to other coupling types. Double joints that have two bearings are able to offset radial displacement in addition.

Precision joints / cardan shafts ET-GWN-35x70 (7GA) in an extendable version are able to offset axial displacement in addition to angular and radial displacement.

Catalogue cardan shafts GA

Download catalogue Cardan ET-GWN-35x70 (7GA) 

Data sheet Cardan couplings type ET-GWN-35x70 (7GA)