FLEXIBLE JAW COUPLINGS RINGFEDER TNS S-ST

RINGFEDER® TNS S-St

Elastic claw coupling with standard single hubs.
The intermediate ring can be replaced after shifting a shaft with fitted hub.
 

Notes

• Standard material for intermediate ring: VkR
• Installed size L must be maintained without fail. Axial displacement e.g. by thermal expansions of the connected shafts, must be taken into account through allowances for value L.
   

General features

• Torsionally flexible, compensate for angular, radial and axial shaft offset
• Intermediate rings loaded in compression
• Elastomers available in various shore hardness degrees
• Suitable for temperatures from –30°C to +100°C
• Outer diameter up to 400 mm
• Bores up to max. 160 mm
• Torques up to TKn = 13,350 Nm / TKmax = 40,000 Nm
• Speeds up to nmax = 15,000 rpm
   

INTRODUCTION

The rotationally resilient coupling of the RINGFEDER® TNS coupling is flexible in all directions and therefore compensates for angular, parallel and axial shaft misalignments of the connected machines. Misalignments can be caused, for example, by inaccurate assembly, heat movements or settling phenomena.
 

Elastic intermediate ring

With the RINGFEDER®-TNS coupling, the torque is transmitted via a compressed elastic intermediate ring. The elastic intermediate ring absorbs shocks and torsional vibrations, is resistant to oil and largely insensitive to temperature.
The strength of different elastomer materials is indicated by their Shore hardness. Elastomers of different strengths are colour-coded for identification. Further details concerning the strength and load capacity are available on request in the technical data sheet.

Elastomer Materials

The elastic intermediate rings of RINGFEDER® TNS are made of butadiene-nitril-rubber (Pb82) or polyurethane (VkR, Vk60D). The black buffer (Pb82) are normally electrically conductive and therefore prevent undesirable electrostatic charges. The red (VkR) and white (Vk60D) rings ensure electrical insulation between connected machines as long as there are no other electrically conductive connections. The resilience of the individual elastomer materials is designated by their Shore hardness. From these values an indirect conclusion can be drawn with respect to the torques the coupling is able to transmit and its spring stiffness. For further details, please see the technical data sheet.
 

Avoiding Torsional Vibration

By virtue of the rotational resilience of the coupling, dangerous torsional vibrations from the operational range of plant machinery can be transferred to rotational speed ranges in which no negative effects are to be expected. The elastic intermediate rings possess a high material damping capability which makes it possible for the couplings to keep the resonance enhancements within limits when passing through dangerous speed ranges, thereby protecting the coupled machines against damage. The couplings also mitigate torque shocks and cause a vibrating system that has been excited by an impact to come to rest very quickly due to the material damping qualities. The conduction of structure-borne noise is prevented.
 

Environmental conditions

Các vật liệu đàn hồi được sử dụng hoạt động đáng tin cậy trong phạm vi nhiệt độ xung quanh –30 ° đến + 100 ° C. Vui lòng liên hệ với BỘ TRUYỀN ĐIỆN RINGFEDER nếu có liên quan đến nhiệt độ môi trường cao hơn. Ảnh hưởng của nhiệt độ đến việc lựa chọn kích thước khớp nối được giải thích chi tiết hơn trong các chỉ thị thiết kế được đề cập bên dưới. Nó chỉ được phép vận hành khớp nối trong không khí công nghiệp bình thường. Phương tiện xâm thực có thể tấn công các thành phần khớp nối, bu lông và các phần tử đàn hồi, và do đó, gây nguy hiểm cho sự an toàn vận hành của khớp nối. Khớp nối có thể được tuyên bố là tuân thủ Chỉ thị Châu Âu 2014/34 / EU (ATEX). Vui lòng liên hệ với RINGFEDER POWER TRANSMISSION về việc tuyên bố sự phù hợp theo 2014/34 / EU và ảnh hưởng của các phương tiện truyền thông xung quanh.