ROTEX ZR TORSIONALLY FLEXIBLE HALF SHELL COUPLING WITH INTERMEDIATE SHAFT

DESCRIPTION: Jaw coupling for bridging large shaft distances The torsionally flexible jaw coupling ROTEX ZR is an half shell coupling (coupling with split hub) with intermediate shaft for bridging large shaft distances. Couplings with split hubs are also referred to as drop-out center design couplings, half-shell couplings, clamping coupling or elastomer couplings with split clamping hubs. The intermediate shaft coupling ROTEX ZR allows for bridging large shaft distances. Its half shell clamping hubs allow for radial assembly/disassembly (drop-out center design coupling). Due to its double-cardanic arrangement the intermediate shaft coupling is able to offset large displacements. Fields of application of the torsionally flexible half shell coupling ROTEX ZR with intermediate shaft: This intermediate shaft coupling with half shell clamping hubs is used wherever large shaft distances must be bridged, e . g. on scissors lifts and conveyor systems in the lower torque range.

SPECIFICATIONS

ROTEX ZR torsionally flexible half shell coupling with intermediate shaft

Jaw coupling for bridging large shaft distances

The torsionally flexible jaw coupling ROTEX ZR is an half shell coupling (coupling with split hub) with intermediate shaft for bridging large shaft distances.

Couplings with split hubs are also referred to as drop-out center design couplings, half-shell couplings, clamping coupling or elastomer couplings with split clamping hubs.

The intermediate shaft coupling ROTEX ZR allows for bridging large shaft distances. Its half shell clamping hubs allow for radial assembly/disassembly (drop-out center design coupling). Due to its double-cardanic arrangement the intermediate shaft coupling is able to offset large displacements.

Fields of application of the torsionally flexible half shell coupling ROTEX ZR with intermediate shaft:

This intermediate shaft coupling with half shell clamping hubs is used wherever large shaft distances must be bridged, e . g. on scissors lifts and conveyor systems in the lower torque range.

MỌI THẮC MẮC HOẶC YÊU CẦU BÁO GIÁ, QUÝ KHÁCH VUI LÒNG LIÊN HỆ:
PHÒNG KINH DOANH
HOTLINE: 0906 955 057 – EMAIL: INFO@DHP-CORP.COM.VN

Features orsionally flexible jaw coupling ROTEX ZR

Double-cardanic jaw coupling with half shells (half shell coupling) and intermediate shaft (cardan shaft)
For bridging large shaft distances
Good damping properties (Vibration-damping) by double arrangement of spiders
Intermediate pipe radially dismountable with flexible bearing in the GS spider
Compensating for large displacements due to double-cardanic design
Radially mountable/dismountable with DH clamping hubs
Complying with ATEX
Maintenance-free and easy to service

THÔNG SỐ KỸ THUẬT KHỚP NỐI TRỤC KTR ROTEX ZR

ROTEX® type ZR (No. 037)
Size	Finish bore Ød		Dimensions [mm]						Intermediate pipe Torsional stiffness/m		Clamping screw Component 2.0		Clamping screw Component 7.5/7.6		min. LR1	min. LR2
Size	Compo- nent 1a	Compo- nent 7.5/7.6	DH	l1; l2	x1; x2	E	s	b	RA	C2) [Nm²/rad]	M1	TA [Nm]	M2	TA [Nm]	min. LR1	min. LR2
19	25	20	40	25	17.5	16	2.0	12	Ø20x3	954.9	M6	14	M6	10	110	97
24	35	28	55	30	22.5	18	2.0	14	Ø30x4	4522	M6	14	M6	14	128	111
28	40	38	65	35	25.5	20	2.5	15	Ø35x4	7611	M8	35	M8	35	145	129
38	48	45	80	45	35.5	24	3.0	18	Ø40x4	11870	M8	25	M8	35	180	157
42	55	55	95	50	39.0	26	3.0	20	Ø45x4	17487	M10	49	M10	69	198	174
48	62	60	105	56	45.0	28	3.5	21	Ø50x4	24648	M12	86	M12	120	217	190
55	74	70	120	65	50.0	30	4.0	22	Ø55x4	33544	M12	120	M12	120	242	220
65	80	80	135	75	60.0	35	4.5	26	Ø65x5	68329	M12	120	M12	120	281	250
75	95	90	160	85	67.5	40	4.0	30	Ø75x5	108000	M16	295	M16	295	318	285

MỌI THẮC MẮC HOẶC YÊU CẦU BÁO GIÁ, QUÝ KHÁCH VUI LÒNG LIÊN HỆ:
PHÒNG KINH DOANH
HOTLINE: 0906 955 057 – EMAIL: INFO@DHP-CORP.COM.VN